2023 Malibu 23LSV with Shoreline Brands Bimini Extension and Shade Sails

Nautique Telescoping Tower Bimini Extension: More Shade for Your G23 and G25

Shoreline Brands makes a bimini extension built specifically for Nautique boats with the telescoping power tower. It clamps onto the 1.5" bimini frame tubing with no drilling, adds an 80" x 80" shade toward the stern, deploys in about 60 seconds, and is rated for use up to 15 mph, including while wakesurfing. Every kit is hand-sewn and assembled in central Pennsylvania.

80" x 80"shade coverage
60 secondsto deploy
15 mphspeed rated
Made in USAsewn in PA

Shop the Nautique Telescoping Tower Extension

Which Nautique boats does it fit?

The kit fits all Nautique boats equipped with the telescoping power tower. It mounts to the tower's 1.5" bimini frame tubing, so the clamps fit without spacers.

Nautique owners are running it on models including:

  • Nautique G23
  • Nautique G25

Not sure which tower you have? Send us your year and model and our team will confirm the right kit.

Nautique G23 with telescoping power tower and a Shoreline Brands bimini extension shading the stern

Which Nautique kit do you need?

Shoreline Brands makes three kits for Nautique boats, depending on your tower and model year:

Nautique Telescoping Tower Bimini Extension

For boats with the telescoping power tower. Clamps to the 1.5" bimini frame tubing and extends shade toward the stern.

2019–2026 Nautique Standard Tower Shade Sail

For 2019 and newer boats with the Flight Control Tower. Bolts to the factory speaker mounts on top of the tower.

Wake Boat Universal Bimini Extension

For Nautique boats from 2018 and older. Mounts to your wake tower and fits all tubular style towers. Also Compatible with 2019 - 2026 Nautique GS Models

What's included

  • (1) custom sun shade, 80" wide x 80" long
  • (2) 3K carbon fiber telescoping poles
  • (2) CNC-machined aluminum 1.5" bracket assemblies
  • (1) canvas storage and carrying bag

Specifications

Fits All Nautique boats with the telescoping power tower
Shade size 80" W x 80" L
Poles 3K carbon fiber, 36" collapsed / 96" extended
Mounting Clamps to 1.5" bimini frame tubing, no drilling or modification
Tools needed One 3/16" or 5mm Allen wrench
Adjustability Horizontal and vertical, for precise coverage
Speed rating Up to 15 mph
Deploy time About 60 seconds once installed
Color Black (custom colors available for an added fee)
Made in Hand-sewn and assembled in central Pennsylvania, USA

How to install it on your Nautique

Installation takes one Allen wrench and no drilling:

  1. Open each clamp, wrap it around the 1.5" bimini frame tubing about 8 inches forward of the rear edge, and reassemble it with the bracket pointing back.
  2. Slide a telescoping pole into each clamp's receiver tube and extend it.
  3. Wrap the sewn-in straps on the front edge of the shade around both brackets and pull them tight so the shade is centered.
  4. Loop the reinforced rear grommets over the pole ends to tension the shade.

If one side sits higher or tighter, adjust the pole height or shift the front straps. See the full step-by-step install guide with photos.

Using it on the water

  • Cruising and surf sets: rated to 15 mph, so you can leave it up while you idle, cruise slowly or pull wakesurfers.
  • Wakesurfing: run your surf rope beneath the shade.
  • Wakeboarding and skiing: take the shade down first.
  • Dialing in coverage: adjust horizontally and vertically to put shade where your crew is sitting.

What Nautique owners say

"Kevin worked with me to customize a new product for our G23. The communication was great and we got a customized bimini extension for a great price!"

Ben H., 2023 Nautique G23

Read reviews from Nautique owners

Nautique bimini extension FAQ

Will it work with my Nautique's telescoping tower bimini?

Yes. The kit is designed specifically for Nautique boats running the telescoping tower bimini and clamps directly to its 1.5" frame tubing.

What if my Nautique has the standard tower?

Choose the 2019–2026 Nautique Standard Tower Shade Sail instead. It bolts to the factory speaker mounts on top of the standard tower.

What if my Nautique is a 2018 or older?

Choose the Wake Boat Universal Bimini Extension. It mounts to your wake tower and is the kit we recommend for Nautique boats from 2018 and older.

Do I need to drill into my tower?

No. The install requires no drilling or modification to your tower or bimini. You only need a 3/16" or 5mm Allen wrench.

Can I drive with the shade up?

Yes, up to 15 mph. That rating accounts for typical wind on the lake. On Calm days you may notice you can exceed this rating. We recommend only using up to these speeds to maximize the longevity of the product for many years.

Can I wakesurf with it up?

Yes. Pass your surf rope beneath the shade. Take it down for wakeboarding or waterskiing.

How do I store it?

The brackets stay on the bimini frame. The poles collapse to 36" and the shade folds into the included storage bag.

Does it come in other colors?

Black is stocked. Custom colors are available for an added fee. Contact us for options.

Ready for more shade on your Nautique?

Shop the Nautique Telescoping Tower Extension